Bei-sensors Programmable Hall Device Manuel d'utilisateur télécharger pdf (Page 11)

7230 Hollister Avenue, Goleta, California 93117 | Tel: 805-968-0782 | Fax: 805-968-3154 | www.beisensors.com

Specication No.: 02135 Rev: 5-23-2013

PHD User Manual

5. Rotate the part in the appropriate direction (In this example Counter Clockwise) as selected

in the “Rotation Direction” eld to the next programming point, Point B and click “Program B”

without moving the part from the desired position.

6. If you have selected something other than a “2 Points” programming option, repeat steps

4 & 5 for the remaining points. Otherwise, you may release the part and click “Finalize

Programming” to nish the programming process.

7. You may now repeat the process for the other sensor. The procedure is the same if you have

selected “Synchronous Programming”.

1 2 ... 6 7 8 9 10 11 12 13 14

Pas de commentaire

Bei-sensors Programmable Hall Device Manuel d'utilisateur Page 11